Convertible top, hardtop 911 Carrera (996) · Making support cheeks (B)

Convertible top, hardtop 911 Carrera (996) Making support cheeks (B) Basic material: Multiplex plate 600 x 120 mm, 25 mm thick A4 = Straight pin 6 M6 x 40/ B = Support cheek 21_97 Procedure: 1. Transfer160 mm radiusto the multiplex 4. Drill three ~ 6 mm holes, 20 mm deep, plates. in the support cheeks (8) to accommodate the straight pins (A4) 6 M6 x 40 from 2. Saw multiplex plates along the traced radius. the set of fittings (A). These straight pins The foot of the sabre saw must be tilted by will be used to fasten the support cheeks (8) 150 for this purpose. to the base plate (8). 3. Drill four f36 mm holes in the support radii of each support cheek to provide clearancefor the Tucker bolts on the hardtop body. Obtain the dimensionsfrom the hardtop body. 61 -124 6102 Assembly instructions for hardtop assembly fixture 99661123 Printed in Gennany -17, 1998