Danger of injury caused by loose glass splinters and sharp · window edges.

911 Carrera (996) Glazing,windowcontrol Danger of injury caused by loose glass splinters and sharp window edges. During removal and installation, wear protective glasses and leather gloves. No. Procedure Instructions Wind down the door windows. Note: the door windows must not be closed until after the curing time has elapsed. Maskingthe wing corners Mask the wing corners with adhesivetape in the area of the cowl panel in order to protect the paintwork. Pulling off cover trim -1- Undo and removethe cover trim -1-. 2 Removing cowl panel cover -2- ~ Rep. Gr. 702219; Removingand installing cowl panel cover RemovinginnerA-pillartrim ~ Rep.Gr. 705719; Removingand installingtrim of A, B and C-pillars Removingthe interior rearviewmirror ~ Rep. Gr. 682719; Removingand installing interior rear- view mirror 3 Removing defroster covers -4, 5- Lift the alarm readiness light -3- and unclip it to the rear. Lift the defroster covers on the left and right -4, 5- and unclipthem. Checkfastening clips -6-, replace if neces- sary. 4 Disconnectingthe windscreenantennaplug connection 5 Cutting out the windscreen Fit a U-typecutting knife to the cutter -E-. Set the vibration frequencycontroller to 5. Cut through the bond between the body and the windscreen at the top and sides. Fit a U- type cutting knife -8- to the cutter -E-. Cut through the bond betweenthe body and the windscreen at the bot- tom. Removethe windscreen. Note: when cutting out the windscreen,ensure that the label with the vehicle identificationnumber and the surrounding section is not damaged. Removingthe windscreen Pullingoff surroundingsection Carefullydetachthe surroundingsectionfrom the wind- screen.If the surroundingsectionis removedfrom the windscreenundamaged,it can be re-used. 641219 Removing and installing windscreen 64-1 page 3 Printed in Germany -41,2000 c6412191