Glazing,windowcontrol 911 Carrera (996) · Removingadhesivefrom the body Removeadhesiveresidues -7- from

Glazing,windowcontrol 911 Carrera (996) Removingadhesivefrom the body Removeadhesiveresidues -7- from the body with the cut- ter -E- and flashing knife -D-, ensuring that a residual cov- ering of adhesiveremains -8-. Note: the residualcovering of adhesiveacts as an adhesive foundationfor new bonding material. Keep cut surfaces clean and free of grease and do not clean with cleaning solution. Removingadhesivefrom the windscreen Equipthe cutter -E- with the flashing knife -D- and remove the adhesiveremainson the pre-coatedbonding section .Only if the windscreenis re-installed of the windscreenso that as much as possible of the bonding section of the pre-coatingis preserved. Note: the bondingsection of the pre-coatingacts as an adhesive foundationfor new bonding material. Keep cut surfaces clean and free of grease and do not clean with cleaning solution. 7 Cleaningand priming paint damage or Clean new paint surfaces and damage to the roof paint in newly built-up paint areas in the window the non-visiblearea of the windowaperture of the body aperture of the body with cleaningsolution -HI- and touch up with primer -H2-. Note: observe the drying time of 10 minutes minimumafter cleaning!No cleaningsolution residues may remainon the body.