Glazing, window control 911 Carrera (996) · & Caution!

Glazing, window control 911 Carrera (996) & Caution! The bonded joint does not have its final strength immediately. The vehicle must not be used until the curing time has elapsed. In order to ensure that the bonded joint is sufficiently strong, the following boundary conditions must be adhered to: .Time between applying adhesive and inserting windscreen: max. 10 min .Temperature: at least 10 °C .Fixing time: approx. 1 hour .Curing time: 3 hours rn Note! The removed windscreencan be reinstalledif there is no prior damage to the windscreenand the windscreenwas removed without damage. No. Procedure Instructions Fitting surroundingsection -1- and cover Positionthe surroundingsection -1- on the windscreen trim -2- and press the cover trim -2- into the groove of the sur- roundingsection. Note: if the surroundingsection and the cover trim have been removedfrom the windscreenwithout damage, they can be re-used. Fitting spacer blocks Clip in spacer blocks and press in body-boundrivets. 2 Fitting defroster covers -4, 5- and alarm Checkthe fastening clips -6-, replace if necessary. Insert readiness light -3- the defroster covers left and right -4, 5- and clip in under the alarm readinesslug. Engagealarm readiness light -3-. 3 Markingthe bondingarea Before applyingthe adhesivematerial,mark the course of the adhesivebead in accordancewith the dimensions-A- .Only with new windscreens 160 mm, -8- = 30 mm on the left and right on the lower edge of the windscreen. 4 Activating the bonding section of the wind- Apply activator -H3- to the bonding section of the pre- screen coated windscreen. Note: .Only with newwindscreens pre-coatedwindows must not be treated with cleaning solutions. Do not apply activator to painted surfaces. Allow a drying time of at least 10 minutes!