996 Carrera Group 6 Body Equipment, Exterior / PAGE 202
Preparing2-componentbondingmaterial ~ 6-7 "Processingof Porsche 2-componentwindow · for processing bondin
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Glazing,windowcontrol
Preparing2-componentbondingmaterial ~ 6-7 "Processingof Porsche 2-componentwindow
for processing bonding agents"
Note:
observe open time of 15 minutes!The open time is the
time within which the bonding material must be applied
and within which the windscreen must be put into the
body.
6 Applying bonding material to the wind- Usingthe bondinggun, apply 2-componentbonding mate-
screen rial to the windscreenalong the cover trim in the form of a
triangular bead. Applythe adhesivematerial in accord-
ance with the markings in the lower part of the wind-
screen. Dimension-X- = approx. 15 mm.
Whenapplyingthe adhesive,it is essentialto ensure that it
overlaps.
Note:
two personsare neededto insert and adjust the wind-
screen!
7 Insertingthe windscreeninto the body Apply suction cups -F- to the windscreenand insert the
windscreeninto the window aperture. Pressthe wind-
screen up as far as it will go. Whendoing so, press the
lower edge of the glass againstthe spacer blocks.
Cleaningthe fields of vision Adhesivewhich has oozed out must be removed immedi-
ately and the affected fields of vision must be cleaned
using cleaning agent -HI-.
8 Attachingthe windscreenantenna Insertthe plug of the windscreenantennainto the antenna
amplifier.
Installingthe A-pillartrim ~ Rep. Gr. 705719; Removingand installingtrim of A, B
and C-pillars
cowl panel cover ~ Rep. Gr. 702219; Removingand installingcowl panel
cover
Removingmasking of wing corners Pull adhesivetape off wing corners.
Bondingon the interior rearviewmirror ~ Rep. Gr. 682713; Bondingon the interior rearviewmir-
ror
.Only if the windscreenis replaced
Installingthe interior rearviewmirror ~ Rep. Gr. 682719; Removingand installinginterior rear.
view mirror
Note:
the interior rearviewmirror may only be installedafter a
curing time of 3 hours!
Closingthe door window
Overview of tools and materials
641219 Removing and installing windscreen 64-1 page 7
Printed in Germany-41,2000 c6412191
Installing
This is a source reference. Confirm exact model applicability in the original material.
