Glazing, window control 911 Carrera (996) · Fit rear window

Glazing, window control 911 Carrera (996) Fit rear window No. Procedure Instructions 6 Apply activator to the bonding Apply activator (H 5) to the bonding section section of the rear window of the precoated rear window. Note Allow a drying time of at least 10 minutes! 7 Clip together cartridges Clip the cartridge containing component B of the components A and B to the cartridge containing component A. 8 Open the assembled cartridge Evenlycut off the seals of the assembled cartridge with a knife. 9 Secure the mixing tube Push the mixing tube (H 3) into the groove provided for this purpose over the assembledcartridge and secure it with the union nut. 10 Insert the cartridge Insert the assembled cartridge, including mixing tube, into the bonding gun into the bonding gun (F). Note Observeopen time of 15 minutes! The open time is the time within which the adhesive must be applied and the rear window inserted in the body. 11 Fit surrounding section and Place surroundingsection on the rear window and press cover trim cover trim into groove of the surroundingsection. Note If the surroundingsection and cover trim were removed from the rear window undamaged,they can be re-used. 64 -20 64 86 19 Removing and installing rear window 9966415 Printed in Gennany -6, 1997