Warning:& · I The hardtop body parts are riveted together; the riveted joints will be destroyed

911 Carrera (996) Glazing, window control Warning:& I The hardtop body parts are riveted together; the riveted joints will be destroyed .if the rear window is cut out improperly! > Take care to cut close to the rear window. No. Procedure Instructions 7 Cut out the rear window Equip cutter (A)with the U-typecutting knife (C). Set the oscillation-speedcontrol to Stage 5. Cut through the adhesivejoint between the body and the rear window at the top and sides. 8 Only if the rear window Equip the cutter (A)with the flashing knife (E) and use it is re-installed: to remove the adhesiveresidues on the rear window. Removeadhesiveon HoweverI stop when a layer of approx 2 to 3 mm remains the rear window so that the screen-printedborder is not destroyed. 9 Removeadhesiveon Use the cutter (A)and the flashing knife (E)to remove the hardtop body adhesiveresidues on the hardtop body, leaving a layer of adhesiveall around. Note Removeadhesive residues betweenthe riveted joints as thoroughly as possible without damagingthe riveted joints. Paint damage in the window aperture must be repaired. 64 86 19 Removing and installing rear window (hardtop) 64 -27 Printed in Germany -13, 1998 9966423