Glazing, window control 911 Carrera (996) · No. Procedure Instructions

Glazing, window control 911 Carrera (996) No. Procedure Instructions 10 Cleanand prime the window Clean window aperture of the hardtop body with cleaning aperture of the hardtop solvent (H5). Prime repaired areas of the paintwork in the body concealed part of the window aperture with primer (H4). Use the swabs (H6) intendedfor this purpose. Note Always allow a drying time of at least 10 minutes after cleaning! Cleaningsolvent residues must not remain on the hardtopbody. Installing rear window 11 Only if the rear window Apply activator (H5)to the adhesiveprofile of is re-installed: the rear window using the swab (H6). Activate adhesive profile of the rear window 12 Only when installing Apply activator in the area of the screen print, let dry and a new rear window: prime the screen print of the rear window with glass Clean and prime the primer (G). screen print Note Always allow a drying time of at least 10 minutes! 13 Clip together cartridges of Clip cartridge with componentB to the cartridge the A and B components with componentA. 14 Open the completed cartridge Evenlycut off the outlets of the completed cartridge with a knife. 64 -28 64 86 19 Removing and installing rear window (hardtop) 9966423 Printeld in Germany -13, 1998