996 Carrera Group 6 Body Equipment, Exterior / PAGE 225
Glazing, window control 911 Carrera (996) · No. Procedure Instructions
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Glazing, window control 911 Carrera (996)
No. Procedure Instructions
Clean the visible areas Any emerging adhesive must be removed immediately,
and the affected visible areas must be cleaned with
the cleaning solution (H5).
21 Plugin the rear windowheater Plug in electrical plug connectionson the left and
right-handsides of the rear window.
22 Fit the interior Position and clip in the interior trim parts at the rear and
sides and the hardtop locking element covers on the left
and right.
Important
The adhesivejoint does not attain its final strength immediately.The following conditions must be
observed in order to ensure adequate strength of the glued joint:
Curingtime 3 hours
Temperature at least 100 C
Fixingtime approx. 1 hour
The hardtop must not be used on the vehicle before the curing time has ela:psed!
64 -30 64 86 19 Removing and installing rEiar window (hardtop)
9966423 Printed in Germany -13, 1998
This is a source reference. Confirm exact model applicability in the original material.