996 Carrera Group 6 Body Equipment, Exterior / PAGE 239
Additional instructions for adjusting or replacing the rear power window · The rear power windows can be operated if:
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Glazing, window control
Additional instructions for adjusting or replacing the rear power window
The rear power windows can be operated if:
1. -the convertible-topis closed. Blockage detection function
If the window drive encountersresistance when
-the ignition is switched on. activated,the motor is switched off after a delay
of 500 ms.
3. -after the ignition is switched off, if If the rocker switch is pressed again within
the ignition key is not removed from 10 seconds, the side window closes the power
the steering lock. windowwith all of its closing force.
The anti-<:rushingprotection is deactivated.
4. -after the ignition is switched off until
a door is opened for the first time.
5. -the door is open, USAvehicles do
not have this function.
Standardising the system
The system must be re-standardised after an
interruption in the power supply to the power
window electronics.
To do this the convertible top must be closed.
The position-controlled lowering function in the
case of convertible top actuation, and enabling
for "automatic start-up" of window closing and
opening are redefined.
The standardisation process is initiated by
continuous actuation of the operating button
toward "close window". To do this
the convertible top must be closed and
the hardtop must be fitted.
The button must be held until the window is
closed and is switched off by the blockage
detection function of the power window
regulators.
64 71 19 Removing and installing rear power windows (Cabriolet) 64 -45
Printed in Germany -17, 1998 9966439
This is a source reference. Confirm exact model applicability in the original material.
