Automatic transmission -Actuation, ass. housing 911 Carrera (996) · Removingand installing selector support

Automatic transmission -Actuation, ass. housing 911 Carrera (996) Removingand installing selector support Removal I 1. Remove$electorknob(referto ServiceNo. 6. Disconnectplugconnection. 3704 19). 2. Removecentre console (refer to Service No. 68 17 19). ,...f7o ~ ~ 3. Move selector lever to position "0", Q '" 4. Disengagekeylockcable: ~ ,.. -Open adjuster (3) by pressing the unlocking / ~ / button (7). ... .;o~ .'0.. \-t.:";:- -Press the retaining clip (4) together and ~:.~~., carefully pull the adjuster (3) upward out of the support bracket. 406 -97 -Disengage cable nipple (1) on the keylock 7. Unscrewfasteningnuts(11). lever (2). 5. Disengagingselectorlevercable: Installation -Slide the locking sleeve of the adjuster for- Installin reverseorder,observingthe following ward and turn it clockwise to removal points: position (8). 1. Tightenfasteningnuts (11)to 10 Nm Press the retaining clip (10) together and carefully pull the cable upward out of the (7.5 fdb.). support bracket. 2. Fasteningselectorlevercable: -Press the cable into the support bracket un- til the retaining clip engages in the housing (10). -Press cable into the open adjuster {8} and close the adjuster {9}. The locking sleeve must move to the end position automat- ically {9}. 37 -AS 37 08 19 Removing iand installing selector support 99637A3 Printed in Germany -4, 1997