3. Fasteningkeylockcable: 5. Removeselectorknoboncemore. · Note I

911 Carrera (996) Automatic transmission -Actuation, housing 3. Fasteningkeylockcable: 5. Removeselectorknoboncemore. Note I 6. Fit rotary valve in correct position and Adjust the keylock cable only with the selector install centre console. knob fitted. -Install selector knob (refer to Service No. 37 04 19). -Turn ignition key to position "1" (ignition on) and move selector lever to position "0", -Open adjuster (3), -Engage cable nipple (1) on the keylock lever(2). -Press housing for adjuster (3) into the support bracket until the retaining clip (4) engages. -Move selector lever to position "P" and turn ignition key to position "0" (removal position), 1 -Rotary valve 541_97 2 -Spring -Press cable sleeve (5) toward the selector 3 -Direction of travel support. -Release cable and press locking button (7) until it engages. 4. Checkkeylockfunction: Turn ignition key to position "1" (ignition on). -Move selector lever from position "P"to "0" and turn ignition key counterclockwise. The removal position must not be reached. -Release ignition key again and engage selector lever position "P". In this position, it must be possible to remove the ignition key and the locking button must be locked 37 08 19 Removing and installing selector support 37 -A9 Printed in Germany -18, 1998 99637A3