996 Carrera Group 3 Automatic Transmission — 911uk Edition / PAGE 43
37 87 19 Removing and installing shiftlock solenoid · 1. Rer]1ovecentre console 5. Pull solenoid
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Automatic transmission -Actuation, ass. housing
37 87 19 Removing and installing shiftlock solenoid
Removal
1. Rer]1ovecentre console 5. Pull solenoid holding clip only far enough away
(refer, to Service No. 68 17 19), to permit the solenoid can be removed.
Do not overstretch the holding clip.
2. Removeand install selector support
(refer to Service No. 37 08 19).
3. Removecover plateon selectorleversupport.
4. Pull off cable on manual switch, unclip holder
for plug connection and remove cable from
the cable guides.
n
(
421- 97
, :...:. ,,'--- 2 ~ -a-I
Installation
--=-1 - 1. Fit solenoid in correct position and properly
1 route cable underneaththe cable guides (see
Figure at left).
1 -Cover plate 420-97
2 -Holder for plug connection 2. Plug cable onto manual switch according to wi-
ring diagram and fasten plug connectionwithupport.
holder on the selector s
37 87 19 Removing and installing shiftlock solenoid 37 -A21
Printed in Germany -4, 1997 99637A3
-..:IrK
This is a source reference. Confirm exact model applicability in the original material.