996 Carrera Group 3 Automatic Transmission — 911uk Edition / PAGE 67
Onlythe marked screws may be unscrewed. · The function of the hydraulic control unit can be
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Automatic transmission -Gears, control
Note
Onlythe marked screws may be unscrewed.
The function of the hydraulic control unit can be
impaired if other screws are loosened. - - ,~,
I \
\~\ ,..
\\0 n ~ M
285_97
Installation
Install in reverse order, observing the following
points:
Note
Always pay attention to the allocationwhen
replacing the hydraulic control unit
284_97 (refer to the parts catalogue).
1. Carefullyput on hydraulic control unit and 6. Disconnectplug connectionsfrom the
insert the pin of the detent disc (1) into pressure regulator and sensor for
the groove of the selector valve (2). transmission input speed at the rear of
the hydraulic control unit and detach
the cables at the housing.
r;::::;:;\ ~
8
0
0 fI
286_97
8
38 77 19 Removing and installing hydraulic control unit 38 -A3
Printed in Germany -21, 1999 99638A1
This is a source reference. Confirm exact model applicability in the original material.