Automatic transmission -Gears, control 911 Carrera (996) · 2. First tighten screws for hydraulic control unit T

Automatic transmission -Gears, control 911 Carrera (996) 2. First tighten screws for hydraulic control unit Tightening torques: (arrows) hand tight. Then tighten to 8 Nm (6 ftlb.) from inside outwards. Drain plug on ATF pan 40 Nm (30 ftlb.) ATFpanon transmissionhousing 10 Nm (7.5 ftlb.) ro-j ATF filter on hydraulic control unit 6 Nm (4.5 ftlb. \2:, Hydrauliccontroluniton transmissionhousing 8 Nm (6.0 ftlb.] LJr~1 -= = n ~ 284_97 3. Thinly coat gasket on the suction collar of the ATF filter with Vaselineand install filter. 4. Replace gasket for ATF pan. 5. Clean all four magnets in the beads of the ATF pan and ensure there is contact over the full area of the ATF pan. 6. Tighten screws of the ATF pan in diagonally opposite sequence in several stages. 7. Fill in ATF (refer to Service No 37 02 55). 38 -A4 38 77 19 Removing and installing hydraulic control unit 99638Al Printed in Germany -21, 1999 -='01-