Manufacturer's Certificate · 64/20 ENU 4440 4

911 (996) Manufacturer's Certificate 64/20 ENU 4440 4 Subsequent Securing spacers and wheels installation of The 5-mm thick spacers are secured on thespacers wheel hubs together with the brake discs using countersunk screws (M6x16), Part No. 900.269.106.09. Tightening torque 10 Nm (7.5 ftlb.) The 5-mm spacer must remain on the vehicle when mounting the spare wheel. 5-mm spacer If 5-mm spacers are used, the wheels must be secured using the 5-mm longer wheel bolts used on the 911 GT3, Part No. 996.361.980.00. These wheel bolts are marked with GT or with a red color on the front of the bolt head (arrow) or the rotating spherical cap is galvanized in red. Length “X” approx. 50 mm Tightening torque 130 Nm (96 ftlb.) If the spacer is removed, the original wheel bolts, Length “X” approx. 45 mm, must be used again. The 17-mm spacer rings are mounted on the wheel hubs using the standard wheel bolts, Part No. 996.361.203.00 (dimension X = approx. 45 Wheel bolt mm). Tightening torque: 130 Nm (96 ftlb.). The wheels are mounted on the 17-mm spacer rings using wheel nuts. Part No. 999.182.003.36. Tightening torque: 130 Nm (96 ftlb.). The 17-mm spacer ring must be removed when mounting the spare wheel. Wheel The tightening torque for securing wheels and spacers is 130 Nm (96 ftlb.). mounting: AfterSales PageJul 30,9 2021of 22