Manufacturer's Certificate · 4440 ENU 64/204

911 (996) Manufacturer's Certificate 4440 ENU 64/204 Reworking wing The wing seam and rear spoiler, if necessary, seam (only must be reworked in the area shown: required for vehicles up to A = transition approx. 50 mm model year B = flange approx. 295 mm 2001): C = transition approx. 25 mm The wing seam must be flanged over a width of at least 10 mm and at least 60°; never flange, grind or cut off more than 65°. Adapting the If the rear apron projects beyond the flanged rear apron: rear side section (cut-out A), cut or grind off the projecting part of the rear apron (arrow). Jul 30, 2021 Page 10 of 22 AfterSales