Single Row Pro IMS Retrofit Installation Manual — LN Engineering / PAGE 27
STEP STEP · 29 30
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
STEP STEP
29 30
Lubricate the IMS flange o-rings. Make sure o-ring is Install new microencapsulated bolts. Do not
installed at base of center shoulder bolt! Install IMS overtighten. You will torque them all once the flange
flange by hand. Using a soft face hammer, lightly tap is fully seated against the case.
the IMS flange until it is flush with crank case.
IMPORTANT: If IMS is not centered and flange won't install,
IMS must first be re-centered using OE tool.
NOTE
INSTALLATIONINSTALLATIONMANUALMANUAL PAGE 24
This is a source reference. Confirm exact model applicability in the original material.