Single Row Pro IMS Retrofit Installation Manual — LN Engineering / PAGE 28
STEP STEP · 31 32
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
STEP STEP
31 32
With the flange fully seated against the case and bolts Put Curil-T on sealing flange of center 12-pt nut and
installed, torque fasteners to 10Nm (7.5ft-lb). install finger tight.
Run a magnet around the opening to make sure no piece
of internal wire lock was sheared in the installation process
as this can occur if the mounting plate was not properly
NOTE centered with the IMS.
INSTALLATIONINSTALLATIONMANUALMANUAL PAGE 25
This is a source reference. Confirm exact model applicability in the original material.