INSTALLATION · Installation is now complete. Once the engine is reassembled and other components have

INSTALLATION COMPLETE Installation is now complete. Once the engine is reassembled and other components have been reinstalled, start engine and run until oil light is no longer illuminated. Quickly starting and shutting off the engine 4-5 times will help to achieve oil pressure faster. Repeat this step two additional times. Check and top up engine oil as needed. TIP Do not pull the DME or Fuel Pump relays in hope of achieving oil pressure without the engine starting, the M96 engine will seldom achieve oil pressure in this manner. TIP IMS Solution is designed for 5,000 miles / 6 months oil change intervals. Joe Gibbs Racing DRIVEN DT40 motor oil is recommended. DRIVEN XP9 is required for track use. NOTE IT IS IMPORTANT TO READ AND UNDERSTAND CRITICAL POST PROCEDURE NOTES. PLEASE SEE NEXT PAGE.