996 Rear Axle Coil Spring Replacement — Porsche 20/17 / PAGE 5
Technical Information · 20/17 ENU 4272 4
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 (996)
Technical Information
20/17 ENU 4272 4
2.1.4 ONLY for the relevant coil spring
(see table):
Press compensation part into the
spring plate at the correct position
(not twisted).
1 – Compensation part (new)
2 – Spring plate
3 – Spring-strut mount
Information
None of the 7 cut-outs (Fig. 4,
Figure 4
arrow) on the spring plate must be
left free!
2.1.5 Connect spring strut/supporting mount assembly with spring plate (compensation
part) (Figure 4 -A-).
2.1.6 Fit spring strut/supporting
mount assembly (spring-strut
mount/compensation part/spring
plate) on shock absorber piston rod
(Figure 5 ).
Make sure that the end of the coil
spring is touching the stop on the
spring plate (Figure 5 -arrow-).
Figure 5
AfterSales JunPage7, 52019of 7
This is a source reference. Confirm exact model applicability in the original material.