996 Rear Axle Coil Spring Replacement — Porsche 20/17 / PAGE 6
Technical Information · 4272 ENU 20/174
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 (996)
Technical Information
4272 ENU 20/174
2.1.7 Position stop plate (Figure 6 -1-)
above the spring strut supporting
mount on the piston rod at the
correct position.
1 – Stop plate
2 – Lock nut, M12 x 1.5 (new)
Fit new lock nut (M12 x 1.5) on
the thread of the piston rod on the
shock absorber and tighten it until
1–2 threads of the piston rod are
visible (Figure 6 ). Figure 6
2.1.8 Position/align spring strut
supporting mount with respect
to the shock absorber bracket as
follows (Figure 7 ):
1 – Threaded bolt for spring
strut supporting mount
2 – Shock absorber bracket
• Check installation position in
the vehicle (left/right side)
• One threaded bolt on the
spring strut supporting mount
must be flush with the shock
absorber bracket
• Perform a visual inspection to
check that the coil spring is still
touching the stop at the top
and bottom Figure 7
Jun 7, 2019 AfterSalesPage 6 of 7
This is a source reference. Confirm exact model applicability in the original material.