Air conditioning 911 Carrera (996) · The intake: istributor with throttle body can be

Air conditioning 911 Carrera (996) Note The intake: istributor with throttle body can be swung upw rd as far as it will go for better accessibilit~to the front screw. To do this, both inner hose 41ampsmust be removed. 9. Lift the C,f'ompressorwith spacer sleeve and fastenin screws out of the bracket and carefullyremove to the rear. Disconnectthe electrical plug connection. 10. Undot! e refrigerant lines at the compressor. Immedi tely close connections and lines with 78_96 plugs s that they are air-tight. 3. Empty approx. 80 cm3 of refrigerant oil out of the compressor and into a measuring glass. The remainingquantity of oil (approx. Installation 120 cm3) remainsin the compressor. Note Note Refrigerantoil from the compressor or refrige- New compr ssors are pressurisedand are filled rant oil removed by suction from a previously with the re uired amount of oil for the refrige- run air-conditioningsystem may no longer berant circuit. The remainingoil quantityin the used (special-categorywaste),individualc mponentsmust therefore be taken into accoun . 4. Tightening torque for oil filler screw Mia x 1 26 ...36 Nm (19 ...27 ftlb, 1. First, op~ the cap on the high-pressure side Alwaysreplace the sealing ring. and relie e the pressure from the com- pressor ). 5. Tightening torque for refrigerant line screws M8 x 32 23 Nm (17 ftlb.)2. Open th~ oil filler screw (8) on the com- Use fastening screws from the new com- pressor.1 pressor. Replacea-rings and wet the new rings with refrigerantoil. 6. Do not remove the plugs for the lines and compressor connectionuntil shortly before installation.