Group 9 · Electrics / PAGE 62
7. Ins~1Icompressorwith lines. · There is a spacer sleeve between the
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Air conditioning
7. Ins~1Icompressorwith lines.
Note
There is a spacer sleeve between the
comp essor and the console. This spacer
sleev must be glued onto the compressor
with i stant adhesive before installation.
Enga e electrical connection and install
comp essor with fastening screws.
8. Ins~allexpansiontank with hydraulic pump and
fas~enoil filler necks to holder.
9. Tightening torque for the compressor
fastening screws on the console
M8 screws 23 Nm (17 ftlb.)
Fa tening screws for hydraulic pump
an belt pulley expansion tank
M8 screws 23 Nm (17 ftlb.)
M6 screws 10 Nm (7.5 ftlb.)
10. Mount belt pulley for hydraulic pump and
fit drive belt.
11. F~sten both hose clamps on the intake
di tributor and clip in wire for the air flow
s nsor.
12. In~tall holder for oil filter console and air
cl~aner assembly. Connectthe battery.
13. Fillthe heating/air-conditioningsystem
w~threfrigerant.
87 34 19 Removing and installing compressor -GT3 87 -53
Printed in Germany -25, 1999 GT38751
This is a source reference. Confirm exact model applicability in the original material.