The adjustment function via the hand-held transmitter is correct only · if the radio code and the transponder code of a hand-held

911 Turbo (996) Seat memory S02; S03; 72 Note! The adjustment function via the hand-held transmitter is correct only if the radio code and the transponder code of a hand-held transmit- ter are each stored at the same position in the alarm system control module. Activating/deactivating the parking aid Note! ♦This function is only available in vehicles with seat memory! ♦The parking aid can be activated/deactivated with or without the 9588 Porsche System Tester ll! General The automatic lowering of the passenger-side rearview mirror aids the driver during parking manoeuvres. After a time delay which can be set, the rearview mirror is lowered by the set value as soon as reverse gear is engaged. If reverse gear is disengaged or the rear- view mirror switch touched with reverse gear still engaged, the rear- view mirror returns to its stored position. The following settings can be selected in the menu and coded using the 9588 Porsche System Tester II: ♦Parking aid (activated or deactivated) ♦Parking aid on rearview mirror (right or left) ♦Lowering ♦Delay Note! The parking aid can be activated or deactivated for the individual position buttons ( 1 , 2 or 3 ) or for individual hand-held transmit- ters. Activating the parking aid for a position button (switch for memory seat adjustment) without the 9588 Porsche System Tester II 1. Switch on ignition. 2. Engage reverse gear. 3. Adjust both rearview mirrors to desired positions. 4. Adjust seat to desired position. 7298 Control unit function 72-5 page 3 Printed in Germany – 42, 2003 SGF_XS02