Seat memory S02; S03; 911 Turbo (996)72 · 5. Set desired lumbar positions.

Seat memory S02; S03; 911 Turbo (996)72 5. Set desired lumbar positions. 6. Save seat position. – Press M and corresponding position button ( 1 , 2 or 3 ) simultaneously. Note! ♦The parking aid is activated for the seat position that was stored! ♦Activation of the parking aid must be carried out individually for every seat position! Activating the parking aid for a hand-held transmitter without the 9588 Porsche System Tester II Note! With this method, automatic seat and mirror adjustment by means of the hand-held transmitter is activated in addition to the parking aid function for the key in the ignition lock. 1. Switch the ignition on using the desired key. 2. Engage reverse gear. 3. Adjust both rearview mirrors to desired positions. 4. Adjust seat to desired position. 5. Save seat position. – Press button M and, within 5 seconds, press the 'locking but- ton' on the hand-held transmitter of the key in the ignition lock. Note! ♦The parking aid and seat and mirror adjustment by means of the hand-held transmitter will function correctly only if the radio code and transponder code of the hand-held transmitter are each stored at the same position in the alarm system control module. ♦The positions of the radio and transponder codes can be read out under the 'Learning functions', 'Remote control' or 'Trans- ponder key' menu item after the 'key learning code' is entered. Deactivating the parking aid for a position button (switch for memory seat adjustment) without the 9588 Porsche System Tester II 1. Switch on ignition. 2. Disengage reverse gear if necessary. 3. Adjust both rearview mirrors to desired positions. 72-5 page 4 7298 Control unit function SGF_XS02 Printed in Germany – 42, 2003