fullymatted.
Back to search
996 Turbo diagnostic manual — Turbo applicability only / PAGE 370

80-7Fault code 21 · Outside temperature sensor - short to B+/ short to

Add to repair workspace
Open repair workspace
Open full manual Original source
Original manual page 370
Read extracted page text

OCR can contain errors. Check the original page image for exact wording, warnings and specifications.

911 Turbo (996) Air conditioning H01, H02 80 80-7Fault code 21 Outside temperature sensor - short to B+/ short to ground Diagnostic conditions • Ignition on Note! ♦No control module fault stored ♦No fault with supply voltage (5 V) Possible cause of fault ♦Short circuit to voltage/ground or open circuit in the wiring between the air-conditioning system regulator and the outside temperature sensor ♦Temperature sensor faulty Affected terminals Plug B, terminals 5 and 9 Diagnosis/troubleshooting Work instruction Display OK If not OK 1 Check temperature sen- ♦Switch off ignition approx. 1.2 kΩ ⇒ Step 5 sor (at 23 °C) ♦Pull plug B off the air-condition- ⇒ Step 2 ing system regulator ♦Measure resistance on plug B between pin 5 and pin 9 2 Check wiring between air- ♦Remove connector of tempera- 0 V Repair wiring har- conditioning system regu- ture sensor ⇒ Step 3 ness lator and temperature → End ♦Switch on ignition sensor for short to B+ ♦Measure voltage at plug B of the air-conditioning system regula- tor between pin 5 and ground ♦Measure voltage at plug B of the air-conditioning system regula- tor between pin 9 and ground 3 Check wiring between air- ♦Measure resistance at plug B of ∞ Ω Repair wiring har- conditioning system regu- the air-conditioning system reg- ⇒ Step 4 ness lator and temperature ulator between pin 5 and ground → End sensor for short to ground 8001 Fault code 21 80-7 page 1 Printed in Germany – 15, 2001 21xxxh02

This is a source reference. Confirm exact model applicability in the original material.