996 Turbo diagnostic manual — Turbo applicability only / PAGE 372
80-8Fault code 22 · Interior temperature sensor - short to B+/ short to
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Turbo (996) Air conditioning H01, H02 80
80-8Fault code 22
Interior temperature sensor - short to B+/ short to
ground
Diagnostic conditions
• Ignition on
Note!
♦No control module fault stored
♦No fault with supply voltage (5 V)
Possible cause of fault
♦Short circuit to voltage/ground or open circuit in the wiring
between the air-conditioning system regulator and the tempera-
ture sensor
♦Interior temperature sensor faulty
Affected terminals
Plug B, terminals 6 and 9
Diagnosis/troubleshooting
Work instruction Display OK If not OK
1 Check temperature sen- ♦Switch off ignition approx. 3 kΩ ⇒ Step 5
sor (at 23 °C) ♦Remove plug B from the climate
⇒ Step 2 control
♦Measure resistance at plug B
between pin 6 and pin 9
2 Check wiring between cli- ♦Remove connector from tem- 0 V Repair wiring har-
mate control and temper- perature sensor ⇒ Step 3 ness
ature sensor for short to → End ♦Switch on ignition
B+
♦Measure voltage at plug B of the
climate control between pin 6
and ground
♦Measure voltage at plug B of the
air-conditioning system regula-
tor between pin 9 and ground
3 Check wiring between air- ♦Measure resistance at plug B of ∞ Ω Repair wiring har-
conditioning system regu- the air-conditioning system reg- ⇒ Step 6 ness
lator and temperature ulator between pin 6 and ground → End
sensor for short to ground
8001 Fault code 22 80-8 page 1
Printed in Germany – 15, 2001 22xxxh02
This is a source reference. Confirm exact model applicability in the original material.
