Instrument cluster K20 911 Turbo (996)90 · Tester display Possible causes Remedy

Instrument cluster K20 911 Turbo (996)90 Tester display Possible causes Remedy Brake pad wear ♦Brake pad wear ♦Check brake pads Oil level ♦Oil level too low ♦Read out fault memory of instrument cluster Coolant level ♦Coolant level too low ♦Check coolant level and refill if neces- sary ♦Faults in the wire from expansion tank to instrument cluster or from ground ♦Check wire from ground point 8 to point 8 to expansion tank expansion tank and from expansion tank to instrument cluster and sensor for coolant level. Failure engine-compart- ♦Failure engine-compartment fan ♦Read out DME fault memory (see DME ment fan diagnosis) Coding The following coding options are available under the menu item "Coding": Menu item Function ♦Country coding Selection for following country codings: USA, RoW, UK, Canada, Saudi Arabia and Japan ♦Connect PST 2, switch on ignition and start the automatic control mod- ule search. ♦Select vehicle type 911 (996) and control module instrument cluster ♦Select menu item Coding ♦Select menu item "Country coding" ♦Select the respective country and code with F8 key. ♦Cruise control This menu item enables the instrument cluster to be coded after replacing the instrument cluster or after retrofitting a cruise-control actuator. ♦Connect PST 2, switch on ignition and start the automatic control mod- ule search. ♦Select vehicle type 911 (996) and control module instrument cluster ♦Select menu item Coding ♦Select menu item "Cruise-control actuator" ♦Select the respective menu item with / without cruise-control actuator and code with F8 key 90-5 page 2 9025 Control module function Sgf_xk20 Printed in Germany – 11, 2001