90-7Fault code 9101 · CAN drive bus

911 Turbo (996) Instrument cluster K20 90 90-7Fault code 9101 CAN drive bus Diagnostic conditions • Ignition on Possible cause of fault ♦Short circuit between the two CAN leads (CAN-high and CAN-low) ♦Short circuit between CAN-high (drive) and ground ♦Short circuit between CAN-low (drive) and voltage ♦A faulty control module connected to CAN drive bus Note! ♦The CAN drive bus is connected to the following control mod- ules: ♦DME ♦Tiptronic ♦PSM and steering angle sensor ♦Instrument cluster Note! The plug connections of control modules connected to the CAN drive bus are disconnected for trouble shooting. This causes the additional CAN-relevant fault codes, e.g. "9110 DME control mod- ule" to be stored in the fault memory of the instrument cluster. These fault codes should be initially ignored and should be deleted on completion of the troubleshooting. Affected terminals Plug A, terminals 15 and 31 9025 Fault code 9101 90-7 page 1 Printed in Germany – 8, 2001 9101xk20