PCM2/CDR23 911 Turbo (996)91 · Menu item Function

PCM2/CDR23 911 Turbo (996)91 Menu item Function ♦Country coding Using this menu item, you can code the country code. ♦9588 Connect and start the Porsche System Tester II and switch on the ignition. ♦Select '911 Turbo (996)' in the Vehicle type menu and confirm with the >> key. ♦Select 'PCM2' in the control modules selection and confirm with the >> key. ♦Select 'PCM2 GW' in the PCM2 function selection and confirm with the >> key. ♦Select the coding menu item and confirm with the >> key. ♦Select "country coding" in the PCM2 GW coding menu item and confirm with the >> key. ♦Select "the relevant country coding" from the menu item that is displayed and code it with the F8 key. Data transfer fault If faults are detected when the data is decoded, this is known as a data transfer fault. The faults can arise when the data is coded, when the data is transferred through an input level that is optically too low or when the data is decoded. A fault entry is not recorded. Note! Using the function 'Reset all coding/transfer counters' all set fault counters of all components can be collectively reset to '0'. Extended fault memory Additional data from the PCM2 GW can be read out using this menu item. ♦DTC fault symptom, limit value is exceeded or not reached. ♦DTC storage state, no fault is detected, not present, present. ♦Undervoltage fault type (< 9 volt). ♦Overvoltage fault type (> 16 volt). ♦Fault type, EEPROM fault. ♦Fault type, tuner communication fault ♦Fault type, open circuit in distribution line ♦Frequency counter ♦Temperature ♦Voltage ♦Vehicle speed 91-63 page 8 9101 Control unit function - gateway SgfGWlwl Printed in Germany – 43, 2003