Group 9 · Electrics / PAGE 125
94 23 19 Removing and installing gas discharge lamp (Litronic headlights) · Warning signs (yellow triangle
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Lights, lamps, switches exterior
94 23 19 Removing and installing gas discharge lamp (Litronic headlights)
Warning
Warning signs (yellow triangle
with black high-voltage arrow)& indicate high voltage (risk of
fatal injury).
> When changing a bulb, the light
must always be switched off
before the headlightis opened.
Once removed, a headlightis
not under high voltage.
> The gas dischargelamp (02S lamp)
may only be operated when 351_98
installed in the reflector and
with the headlightinstalled.
> Gloves must be worn for changing Installation
bulbs. Do not touch the glass bulb. 1. Install a new gas discharge lamp. Lock
the cover with control module and insertRemoval
the headlighthousing in the wing.
1. Switchoff the light.
Releasethe headlighthousingand pull out 2. Engagethe electrical plug connection of
forwardsslightly. the automatic headlightbeam adjustment
and lock the headlighthousing in the wing.
2. Disconnectthe electrical plug connection of
the automatic headlightbeam adjustment 3. Carry out function check of the headlights.
and remove the headlight housing.
3. Releaseand open the cover with control
module. Unscrewthe electricalplug connection
on the gas discharge lamp (bayonetlock).
4. Rotate lamp fastening anti-clockwise
(bayonet lock) and remove together
with the gas discharge lamp.
94 23 19 Removing and installing gas discharge lamp (Litronic headlights) 94 -35
Printed in Germany -18, 1998 9969435
This is a source reference. Confirm exact model applicability in the original material.