94 57 19 Removing and installing control module for gas discharge lamp · Warning signs (yellow triangle

94 57 19 Removing and installing control module for gas discharge lamp Warning Warning signs (yellow triangle with black high-voltage arrow)& indicate high voltage (risk of fatal injury). > The light must always be switched ";";"({ off when removing and installing these components(control module, ignition unit, gas discharge lamp, servo motor). Once removed, a headlight is not under high r==1 voltage. 352_98 > The gas dischargelamp (02S lamp) may only be operated when 4. Removethe controlmodulefrom the cover. installed in the reflector and with the headlightinstalled. Removal Installation 1. Switchoff the light. 1. Attach a new control module to the cover and Releasethe headlighthousingand pull out engage the electrical plug connection. forwardsslightly. 2. Lock the cover with control module and insert 2. Disconnectthe electrical plug connection of the headlighthousing in the wing. the automatic headlightbeam adjustment and remove the headlighthousing. 3. Engagethe electrical plug connection of the automatic headlightbeam adjustment 3. Releaseand open the cover with control and lock the headlighthousing in the wing. module. Disconnectthe electrical plug connectionfrom the control module and 4. Carryoutfunctioncheck of the headlights. undo the three fastening screws. 94 57 19 Removing and installing control module for gas discharge lamp 94 -37 Printed in Germany -18, 1998 9969435