94 94 19 Removing and installing servo motor for automatic headligi1t beam adjusbnent · Warning signs (yellow triangle

911 Carrera (996) Lights, lamps, switches exterior 94 94 19 Removing and installing servo motor for automatic headligi1t beam adjusbnent Warning Warning signs (yellow triangle with black high-voltage arrow) & indicate high voltage (risk of fatal injury). > The light must always be switched off when removing and installing these components(control module, 00 ignition unit, gas discharge lamp, servo motor). Once removed, ,/~ a headlightis not under high ':::~~~~~ voltage. 353_98 > The gas dischargelamp (D2S lamp) may only be operated when 4. Removethe ignitionunit(twofasteningscrews). installed in the reflector and with the headlightinstalled. 5. Pressthe releaselever down with a screwdriver and pull out the servo motor towards the rear. Removal 1. Switchoff the light. Releasethe headlighthousingandpull out forwardsslightly. 2. Disconnectthe electrical plug connection of the automatic headlightbeam adjustment and remove the headlighthousing. 3. Releaseand open the cover with control module. Disconnectthe electrical plug connection from the servo motor and undo the two fastening screws. 415_98 94 94 19 Removing and installing servo motor for automatic headlight beam adjustment 94 -41 Printed in Germany -18, 1998 9969435~