Work preparation · The following information is required to teach the hand-held trans-

911 Turbo (996) Alarm system I 48 96 Work preparation The following information is required to teach the hand-held trans- mitter: ♦Key learning code from IPAS ♦24-digit Code No. (see barcode label on key grip) ♦If the key is stolen or the hand-held transmitter is faulty, all keys still in the customer’s possession will be required. Note! ♦During maintenance work, please bear in mind that the transmis- sion frequency of the hand-held transmitter is different according to the country of use. The corresponding reception frequency is printed on the alarm system control module. This reception fre- quency is either: ♦433 MHz with M-number M534 ♦315 MHz with M-Nummer M535; refer to the allocation table for country coding⇒ page 2 Procedure 1. Connect the vehicle keys and the new hand-held transmitter and insert in the ignition. 2. Connect PST2 and switch on ignition. 3. Select "Alarm system" in the menu and press the double arrow key >> . 4. Select "Learning function" in the menu and press the double arrow key >> . 5. Select "Transponder key" in the menu and press the double arrow key >> . 6. "Input key learning code" appears on the screen. Input the key learning code with the arrow keys ∧ and ∨ and press the double arrow key >> . 7. "Please confirm input" appears on the screen. Check the input and press the F7 key to confirm the input. 8. Distinguish between loss and fault and additional hand-held transmitter for the transponder. 9601 Control module function 96-5 page 9 Printed in Germany – 4, 2001 sgf_xi48