Alarm system I 48 911 Turbo (996)96 · 8a) Teaching an additional hand-held transmitter

Alarm system I 48 911 Turbo (996)96 8a) Teaching an additional hand-held transmitter Select a free position (1, 2, 3 or 4) with the arrow key ∨ and press the F8 key. Now the transponder code is saved in the selected position. Note the position of the new transponder code. 8b) Teaching in the case of a lost or faulty hand-held transmitter: Caution! ! ♦ " # ♦ $% # Note! The adjustment function of the seat, mirror and lumbar positions via the hand-held transmitter is correct only if the radio code and the transponder code of a hand-held transmitter are each stored at the same position in the alarm system control module. 8b) Teaching in the case of a lost or faulty hand-held transmitter: In this case, it is first necessary to identify and delete the stored transponder code of the lost or faulty hand-held transmitter. All remaining vehicle keys are required for this purpose, because all transponder codes are erased during the deletion function. The vehicle code of the vehicle key is displayed under "Cur- rent transponder". Press the F3 key. "All codes will be deleted" appears on the screeen; confirm with the F7 key. Insert the vehicle key equipped with the new hand-held transmitter into the ignition lock and switch on the ignition. Establish communication between the PST2 and the control module. Select the position (1, 2, 3,or 4) with the arrow keys ∧ and ∨ and press the F8 key. The transponder code of the first hand-held transmitter has now been taught. Remove the key and repeat the process with the remaining hand-held transmitters. 9. Press the double arrow key << , select menu item "Remote control" and press the double arrow key >> . 10. "Input key learning code" appears on the screen. Input the key learning code with the arrow keys ∧ and ∨ and press the double arrow key >> . 96-5 page 10 9601 Control module function sgf_xi48 Printed in Germany – 4, 2001