Alarm system I 48 911 Turbo (996)96 · 20. "Input key learning code" appears on the screen. Input the key

Alarm system I 48 911 Turbo (996)96 20. "Input key learning code" appears on the screen. Input the key learning code with the arrow keys ∧ and ∨ and press the double arrow key >> . 21. "Please confirm input" appears on the screen. Check the input key learning code and press the F7 key. Note! As the transponder coils must be taught individually, make sure that the allocation of the locations is the same as described under "Transponder code" on the IPAS printout (see step 22). 22. Four unoccupied positions are displayed on the screen. Posi- tion 1 is marked in black. Furthermore, the current transponder code is displayed under "Current key". This code must be stored in the same location as specified in the IPAS printout. Select position and press the F8 key. The position is occupied with the corresponding transponder code. 23. Withdraw the key and repeat steps 19 to 22 for the remaining keys. All remote controls have now been transferred from the old control module to the new control module, and the transponders adapted to the new control module. ♦Check all hand-held transmitters for operation (lock and unlock the vehicle). ♦Check all transponders for operation (engine start). ♦Read out fault memory and delete any stored faults. Identification The part numbers and the system designation (I 48) can be read out under menu item "Identification". 96-5 page 14 9601 Control module function sgf_xi48 Printed in Germany – 4, 2001