7. "Input key learning code" appears on the screen. Input the key · learning code with the arrow keys ∧ and ∨ and press the

911 Turbo (996) Alarm system I 48 96 7. "Input key learning code" appears on the screen. Input the key learning code with the arrow keys ∧ and ∨ and press the double arrow key >> . 8. "Please confirm input" appears on the screen. Check the input key learning code and press the F7 key. 9. "Remote controls were read out" appears on the screen. Press the double arrow key << twice in order to change to the con- trol module overview. Switch the ignition off, remove the old control module, install the new control module and switch the ignition on again. 10. Press the double arrow key >> to set up communication with the new control module. 11. Select the menu item "Learning functions" with the arrow key ∨ and press the double arrow key >> . 12. The menu item "Immobilizer" is already selected. Press the dou- ble arrow key >> . Caution! ♦ 13. "Input immobilizer code" appears on the screen. Input the immobilizer code with the arrow keys ∧ and ∨ and press the double arrow key >> . 14. "Please confirm input" appears on the screen. Check the input immobilizer code and press the F7 key. 15. Select the menu item "Transfer remote control" with the arrow key ∨ and press the double arrow key >> . 16. "Input key learning code" appears on the screen. Input the key learning code with the arrow keys ∧ and ∨ and press the double arrow key >> . 17. "Please confirm input" appears on the screen. Check the input key learning code and press the F7 key. 18. "Remote controls were transferred" appears on the screen. 19. Select the menu item "Transponder key" with the arrow key ∧ and press the double arrow key >> . 9601 Control module function 96-5 page 13 Printed in Germany – 4, 2001 sgf_xi48