96-49Fault code 44 · Driver-side release stuck

911 Turbo (996) Alarm system I 48 96 96-49Fault code 44 Driver-side release stuck Diagnostic conditions • Vehicle with version "safe position" • Central locking changed from "safe position" to "unlocked posi- tion" by control Possible cause of fault ♦Alarm system control module incorrectly coded (country coding) ♦"Save" servomotor cannot be controlled ♦"Save" contact (micro switch) not connected to ground after release Affected terminals Plug A, terminals 5 and 29 Plug B, terminal 3 Diagnosis/troubleshooting Work instruction Display OK If not OK 1 Check country coding ♦In menu item "Country coding", ⇒ Step 2 Re-code control check whether the control module module has been correctly →End coded 2 Check wire from the ♦Switch off ignition ∞ Ω Repair wiring har- alarm system control ⇒ Step 3 ness ♦Pull plugs A and B off the module to the "safe" con- → End alarm system control module tact for short circuit to ♦Pull plug off the door lock on ground. the driver’s side ♦Measure resistance between plug A on alarm system con- trol module pin 5 and ground 3 Check wire from the ♦Switch on ignition 0 V Repair wiring har- alarm system control ⇒ Step 4 ness ♦Measure voltage between plug module to the "safe" con- → End A on alarm system control tact for short circuit to module pin 5 and ground B+ 9601 Fault code 44 96-49 page 1 Printed in Germany – 4, 2001 44xxxi48