96-53Fault code 48 · Airbag signal recognized

911 Turbo (996) Alarm system I 48 96 96-53Fault code 48 Airbag signal recognized Diagnostic conditions • After airbag triggering, the airbag control module sends a signal to the alarm system control module. • This is a triggering log. Possible cause of fault ♦Airbag triggered ♦Open circuit in ground lead from ground point 7 to control mod- ule Affected terminals Plug B, terminal 1 Note! Repair vehicle and erase the fault memory after airbag has trig- gered Diagnosis/troubleshooting Work instruction Display OK If not OK 1 If the airbag has not been ♦Switch off ignition < 5 Ω Repair wiring har- triggered, check ground → End ness ♦Pull plugs A and B off the alarm lead from ground point 7 → End system control module to the alarm system con- ♦Measure the resistance between trol module for open cir- plug B pin 1 and ground cuit 9601 Fault code 48 96-53 page 1 Printed in Germany – 4, 2001 48xxxi48