Removing and installing the wil~g · Before removing the wing, it is ne(:essary to remove the wheel, the wheel housing liner and

911 Carrerea (996) Body front Removing and installing the wil~g Before removing the wing, it is ne(:essary to remove the wheel, the wheel housing liner and the carbon canister. Note: No. Designation iQty. Removal Installation 1 Rubber sleeve 1 Pulloff Press in 2 Main headlight 1 with a socket wrench (width Insert the main headlight (combinationunit) across flats 5), disengage into the guides of the the main headlightand mounting plate and lock it remove it to the front. with the socket wrench (width across flats 5) 3 Sliding piece 1 Pulloff downwards Press in upwards 4 Plugconnection Removefrom the mounting plate by turning 5 Vent hose 1 Pull off Pushon 6 Fastening element 3 Undo 7 Mounting plate 1 Pull forwards and remove Insert the mountingplate from the headlight recess into the holes provided for that purpose and press it back. Insert the main headlightinto the mounting plate guides and lock in place with the socket wrench (width across flats 5). Adjust the mounting plate with the headlightin accordance with the wing contours and tighten the fastening elements. 8 Collar nut M6 5 9 Strut 1 10 Headlightcleaningelement 1 5055 19 Removing and installing ithe wing 50 -7 Printed in Germany, 1997 966505 Downloaded from www.Manualslib.com manuals search engine