No. Designation Qty. Removal Installation · 11 Filler flap 1 Inser

Note: No. Designation Qty. Removal Installation 11 Filler flap 1 Insert a narrow screwdriver Pressin from above in front of the clip, press the fastening lug backwards and hold, and carefullypull off the filler flap upwards. 12 Protective tabs 1 Pull off 13 Rubber sleeve 1 Pulloff 14 Guide ring 1 Unclip Clipin 15 Sleeve 1 Unclip Clipin 16 Hexagon-headbolt M6 x 20 1 Undo Screwin 17 Emergencycable 1 Detach Attach 18 Sheetmetal screw 2 Undo Screw in 84.2 x 18 19 Servomotor 1 Disconnectthe electrical Bolt the servo motor onto plugconnection the sheetmetal bracket with the sheetmetal screwsand connectthe electrical plug connection 20 Combination screw M6 x 14 2 Undo 21 Hinge 1 At the hinge, undo the com- At the hinge, adjust the bination screw by 2 -3 contour of the wing to turns the lid 22 Sheetmetalnut St6.3 11 23 Sheetmetalscrew 11 St6.3 x 14 24 Wing 1 Pull out downwards at the A- Insert the wing under the pillar and remove to the lid hinge and fit the sheet- front metal screws. Adjust the contours and gaps to the doors and lid. Tighten the sheetmetal screws. 50-8 50 55 19 Removing and installing the wing 966505 Printed in Germany, 1997 Downloaded from www.Manualslib.com manuals search engine