DME 7.8 DME 7.8 0 · It is possible to use a filter function to select ce

DME 7.8 DME 7.8 0 It is possible to use a filter function to select certain actual values only. In this case, not all actual values are available for selection. Press F5 key. The following predetermined filters then appear: ♦Engine values ♦Oxygen sensing, bank 1 ♦Oxygen sensing, bank 2 ♦OBD II ♦Misfire detection ♦Knock control ♦Throttle adjusting unit ♦Analog/digital converter ♦Charge pressure control It is now possible to create your own filters in this menu item. Press F5 key. Mark the required actual values and press the double arrow key (>>). A field then appears where the name of the filter can be entered. Enter the filter name and confirm. The newly created filter then appears in the selection list in block capitals. Filters you have created can be deleted or changed. The following values can be called up: ♦Engine speed ♦Engine load ♦Actual engine torque ♦Ambient pressure ♦Mass air flow (HFM) [mass air flow without tank ventilation] ♦Correction factor, height ♦Power supply ♦Intake air temperature ♦Engine temperature ♦Engine compartment temperature ♦Oil temperature ♦Exhaust temperature after TWC (three-way catalytic converter) [value calculated by ECM] ♦Ignition angle Data Output with the Porsche System Tester 2 0-2a page 3 Printed in Germany – 4, 2002 pst_dm78