DME 7.8 DME 7.8 0 · The Data A and B bytes indicate that PIDs 02, 03, 04

DME 7.8 DME 7.8 0 Note! The Data A and B bytes indicate that PIDs 02, 03, 04, 05, 06, 07, 08, 09, 0B, 0C and 0D are supported. $02 Fault code The fault code which caused the storage of freeze frame data is dis- played. $03 Status of injection system Data A: 0000 0010 B: 0000 0010 Data A - Status for bank 1 Data B - Status for bank 2 0 0 0 0 0 0 1 0 7 6 5 4 3 2 1 0 Bit Bit 0 Open-loop control; the conditions for oxygen sensing are not yet fulfilled. Bit 1 Closed-loop control; the signal from the oxygen sen- sor is used to control injection. Bit 2 Open-loop control through conditions such as full load, etc. Bit 3 Open-loop control due to fault in system. Bit 4 Closed-loop control, but faults from at least one oxy- gen sensor. Bits 5 to 7 not used. Note! Only one bit at a time can be set to 1 to indicate the status. $04 Calculated load value Output of calculated load as a percentage of the maximum load. Display between 0% and 100%. In the case of decimal output, conversion factor = 0.3921568 Data output with a scan tool 0-3 page 13 Printed in Germany – 8, 2002 dsc_dm78