Maintenance 911 Carrera (996) · Adjusting the main headlights, Setting the zero adjustment

Maintenance 911 Carrera (996) Adjusting the main headlights, Setting the zero adjustment marking USA version 1. After the main headlightadjustment, turn the adjustmentscrew of the slider (checking Note the lateral adjustment)with a 5 mm ball In accordance with the specifications,the head screwdriver until the "zero adjustment headlights have a spirit level (A) secured marking" correspondswith the reflector. to the lens in the side area in a location clearly visible from the outside. The illustration showsthe main headlight This is used for adjusting and checking removed. the height adjustment. An adjustable slider (8) is attached at the side to the lens to enable the lateral adjustment to be checked. This slider is set to the "zero adjustmentmarking" at the factory following the main headlightadjustment. 024_96 2. Adjustmentscrewthroughthe luggage compartment,see Figure11 -96 C. Note 023_96 Spirit level A (Fig. 023_96) has been omitted Followinga correct main headlight adjustment, for the beginning of the '98 model of the the spirit level must be between the marking. main headlights, USA version. As a result, The lateral adjustment of the main headlights subsequent adjustment of the slider is marked by the adjustable slider. This zero (Fig. 024_96) for zero adjustment adjustmentmarking is set at the factory and marking is also omitted. must not be readjusted. Vertical and horizontal adjustment must be A new adjustment may only be made in the carried out with a headlight adjustment unit. case of accident repairs or replacement of the main headlights. 03 -8 03 20 00 Maintenance 996031 Printed in Germany -18, 1998