Porsche DME 7.8 — OBD II Diagnosis Manual / PAGE 495
DME 7.8 DME 7.8 0 · Figure 1:
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
DME 7.8 DME 7.8 0
Figure 1:
Work instruction Display OK If not OK
6 Check signal wire from ♦Connect special tool 9637 to 0 - 5 Ω Repair wiring har-
DME control module, wiring harness (DME control → End ness
Pin III/12, to CMP sensor module plug) → End
♦Remove connector of CMP sen-
sor 1
♦Measure resistance between
special tool 9637 Pin III/12 and
CMP sensor 1 plug Pin 2
2839 P0341 0-55 page 3
Printed in Germany, 2000 p0341
This is a source reference. Confirm exact model applicability in the original material.