Porsche DME 7.8 — OBD II Diagnosis Manual / PAGE 708
DME 7.8 DME 7.80 · Work instruction Display OK
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
DME 7.8 DME 7.80
Work instruction Display OK If not OK
3 Check B+ supply for oxy- ♦Start the engine Battery positive volt-
gen sensor heating age ♦Measure voltage between pin 3
towards the DME control module
and ground
4 Check wiring ♦Check resistance between pin 4 0 - 5 Ω
and pin II/19
Note!
Do not exchange oxygen sensors ahead of catalytic converter and
after catalytic converter.
0-109 page 4 2469 P1119
p1119 Printed in Germany – 2, 2000
This is a source reference. Confirm exact model applicability in the original material.