Clutch Note · The clutch push rod and the boost spring are

Clutch Note The clutch push rod and the boost spring are Checking the play and pedal end position not adjustable.The boost spring has 2 functions, namelyto provide pedal force Clutch play assistance and to return the pedal. The clutch master cylinder has an inner stop. The following are some of the points which are The push rod and the clutch pedal are always requirementsfor perfect clutch operation: pressed against this stop by the boost spring. Due to the automatic hydraulic adjustmentof the Correct bleeding of the clutch hydraulics clutch, it is not possible to determine the clutch No leaks in the hydraulic system play by checking at the clutch pedal. Checking the pedal end position (pedal Pedalreturnto the startingposition return/return force) Check that the pedal is in end position by pulling Installationposition of the pedals in at the pedal (without the use of force) towards accordance with the series condition. the driver's seat. The pedal must not give way during the Throttle valve operation process. If it gives way, the fault is in the boost spring (arrow) or in the pedals (observe the Check smooth operation, check the full throttle position with the Tester. following instructions). 267_96 03 -16 03 20 00 Maintenance 996031 Printed in Germany -37, 1999