Steeringgear The procedure for the front axle is as follows: · Turn the front wheels as far as they

Steeringgear The procedure for the front axle is as follows: Turn the front wheels as far as they will go. Visually inspect the bellows for damage Perform a visual inspection of the visible sur- faces on the left and on the right. After turning the front wheels to the other steering stop, check the other half of each rubber dust bellows. Track rod joints Note Check the play and dust bellows In the vicinity of the brake cover panels, no Check the function of the dust bellows, bellows visual inspection is possible in a small area. and joints and ensure that they are free of leaks Check this area by touch. If a rubber dust bellow leaks, the corresponding The rubber dust bellows and bellows on the joint or control arm must be replaced, because steering gear and on the tie rods can be dirt or moisture entering will destroy the joint. damaged by external influences,e.g. stone impact, or during assemblywork. If a rubber dust bellows leaks, the joint or the tie rod must be replaced, because dirt or moisture entering will destroy the joint. Running gear adjustment (wheel align- ment values) Check that the screw connections of the suspen- sion adjustmentsystem (wheel alignmentvalues) Axle joints at the front and rear are secure. Check the play and visually inspect the dust bellows for damage. Inspect the dust bellows of the axle joints (ball joints) on the suspension (front and rear) as fol- lows: Put the vehicle onto a lifting platform with the steering lock disengaged. Perform a visual inspection after cleaning. When doing so, the rubber dust bellows should be pressed down with the fingers in order to reveal hidden cracks. 03 20 00 Maintenance 03 -17 Printed in Germany, 1997 996031