996 Carrera Group 1 – Part 1 Engine / PAGE 45
b. Turn round connector clockwise by approx. 7. Fit drive belt. · 900 (bayonetlock). Observe
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Engine -Crankcase, suspension
b. Turn round connector clockwise by approx. 7. Fit drive belt.
900 (bayonetlock). Observe sequencewhen fitting the belt and di-
rection of motion if the belt was run.
(\// '\
\ \
~...~ 11
\,
362.97
338 -97
Note
8. Fit reservoirfor powersteeringsystem. The round connectors are marked.
Left connector -white mark
a. Removeplug. Right connector -blue mark.
6. Fit air conditioning compressor
Before installation, check whether the spacer
sleeve is fitted or present at the rear fastening
point. Grease and fit sleeve.
~'" '" "'" "" "'" I I'"
/
r~
?,;.. ~
206.97
10 01 19 Removing and installing engine (vehicle with Tiptronic transmission) 10 -17
Printed in Germany, 1997 996101
o.~/1"
This is a source reference. Confirm exact model applicability in the original material.